CO2 Laser Machine
Heavy-duty 100W industrial CO2 laser cutting and engraving workstation with 1300x900 mm bed, high-grade EFR/RECI glass tube, water chiller cooling system, and DSP digital motion control for non-metal fabrication.
- check_circle 100W Genuine EFR/RECI Laser Tube: Consistent beam power for deep cutting and ultra-fine raster engraving.
- check_circle 1300x900 mm Spacious Bed: Ideal working envelope for standard half-sheets of acrylic and pre-cut MDF panels.
- check_circle Dual Table System: Switch effortlessly between aluminum knife slats and fine honeycomb mesh.
- check_circle Advanced DSP Digital Controller: Features color display, offline USB drive operation, and dynamic speed tuning.
- check_circle Water-Cooled Closed Loop System: Chiller integration ensures stable gas temperature during continuous cutting shifts.
- check_circle Pass-Through Front & Rear Doors: Allows feeding of extra-long materials exceeding the 900 mm bed limit.
- check_circle Powerful Air-Assist & Exhaust Blower: Keeps lens free of smoke condensation and evacuates toxic fumes safely.
Industrial Applications
Target Production & Material Use CasesPrecision cutting of acrylic channel letters, lightboxes, stencils, and retail point-of-sale displays.
Intricate laser jali screens, decorative boxes, wedding invitations, and wooden toys.
Engraving leather patches, perforating shoe uppers, and clean-cutting synthetic garments.
Personalizing crystal awards, acrylic plaques, wooden shields, and anodized aluminum plates.
Rapid prototyping of rubber gaskets, foam packaging inserts, and cardboard carton samples.
Key Operational Advantages
Engineering ROI & ReliabilityCuts clear acrylic with glass-like smooth, polished vertical edges requiring zero manual flame-polishing.
Equally economical for one-off bespoke prototypes and mass-production thousand-piece batches.
Directly engrave photographs, intricate filigree, barcodes, and serial numbers without mechanical tooling changes.
Consumes under 1.5 kW total power with readily available, affordable replacement consumables.
CO2 Laser Machine — Industrial Summary
Industrial 100W Flatbed CO2 Laser Cutting & Engraving Workstation
The ZR-CO2-1390 Industrial CO2 Laser Machine is a powerhouse manufacturing solution engineered for quick, clean, and dimensionally accurate cutting and engraving across non-metallic substrates. Powered by a premium 100W EFR/RECI sealed CO2 glass laser tube with high catalyst coating and long service life, this machine effortlessly cuts acrylic up to 15 mm, MDF sheets up to 10 mm, solid hardwoods, leather, and packaging materials.
Designed with a rigid floor-standing sheet-metal cabinet, the machine houses a spacious 1300x900 mm work bed equipped with both an aluminum knife-blade table for clean sheet cutouts and a fine honeycomb mesh bed for small craft components. High-precision linear guide rails and stepper motor drives allow engraving speeds up to 60,000 mm/min with razor-sharp 0.01 mm repeatability.
Comprehensive Industrial Features:
- Premium Optics & Laser Tube: Fitted with genuine EFR / RECI 100W CO2 glass tube producing TEM00 mode beam for minimal spot divergence.
- Dual Cutting Bed Included: Knife-blade table for minimal back-reflection on acrylic and honeycomb table for flexible craft stock.
- Integrated Safety Interlocks: Cover-open laser kill switch, water flow sensor cut-off, and emergency stop interlock prevent workshop hazards.
- Broad Graphic Compatibility: Proprietary DSP controller supports direct imports from PLT, DXF, BMP, DST, AI, SVG, and CorelDraw.
Technical Specifications & Machine Architecture
| Specification | Parameter / Value |
|---|---|
| Laser Power | 100 W |
| Laser Type | EFR, RECI CO2 Laser Tube |
| laser tube type | Glass Tube (Sealed CO2) |
| Usage/Application | NON METAL Cutting & Engraving |
| Application | Non metallic product cutting and engraving |
| Cooling | Water cooled |
| Cooling System | Water Cooled (Industrial Chiller Compatible) |
| Voltage | 220-240 V AC 50/60 Hz |
| Working Bed Area | 1300 x 900 mm |
| Cutting Speed | 0 - 30,000 mm/min |
| Engraving Speed | 0 - 60,000 mm/min |
| Supported File Formats | PLT, BMP, DXF, DST, AI, T100, SVG |
| Compatible Materials | Acrylic, MDF, Wood, Bamboo, Paper, Leather, Fabric, Marble, Jade |
| Minimum Order Quantity | 1 Piece |
Customer Reviews & Operational Ratings
Genuine evaluations from manufacturing plants, fabrication units, and machine operators across India.
Based on 0 verified client reviews.
No Reviews Yet
Be the first industrial buyer to review this machine or spare part. Your operational feedback assists manufacturing engineers nationwide.
Complementary Industrial CNC Systems
CO2 LASER Cutting & Engraving Machine
High-precision CO2 laser cutting and engraving machine (60W–180W) engineered for clean cutting and fine engraving on acrylic, wood, leather, and glass. Built with durable Leadshine motion, CW water cooling, and versatile bed options up to 1400×1000 mm for signage, crafts, and prototyping.
CO2 Laser Engraving Machine
Industrial 1300x900 mm flatbed CO2 laser cutting and engraving machine powered by a 100W EFR catalyst-enhanced laser tube. Featuring dual precision linear guide rails, hybrid microstepping drives, high-velocity huff air-assist, and a convertible honeycomb and knife-blade table delivering up to 500 mm/s engraving speeds and 10 mm clean acrylic cutting.
CNC Router 1325 Wood Working Machine
Experience precision and power with the CNC Router 1325 Woodworking Machine. Featuring a heavy-duty steel frame and a high-speed 6KW air-cooled spindle, it delivers flawless carving, cutting, and milling for furniture, MDF, acrylic, and more.