1530 Series Stone CNC Router, 6 Kw
Extra-large 1500x3000 mm (5x10 ft) industrial stone and granite CNC machining center. Features a high-output 6.0 kW water-cooled electrospindle, reinforced heavy-gauge stainless steel water bed, high-torque dual Y-axis stepper/servo drives, and 3000 mm/min heavy milling capacity for large architectural slabs, monuments, and stone facades.
- check_circle Expansive 1500 x 3000 mm Table: Fits oversized 5x10 ft quarry slabs, architectural stone facades, and monument blocks.
- check_circle 6.0 kW Constant-Power Spindle: Water-cooled electrospindle provides immense torque for continuous stone milling shifts.
- check_circle 1800+ kg Vibration-Damped Frame: Heavy-gauge boxed steel chassis eliminates chatter and tool wear on hard stones.
- check_circle 3000 mm/min Stone Feed Velocity: High-efficiency cutting parameters dramatically accelerate cycle times on 3D reliefs.
- check_circle Dual Y-Axis Motorized Synchronization: Guarantees gantry alignment and zero rack backlash along the 3-meter axis.
- check_circle Stainless Steel Water Bed & Recirculating Jets: Keeps diamond tooling cool and flushes stone sludge into settling basins.
- check_circle G-Code Industry Compatibility: Fully compatible with ArtCAM, Type3, Aspire, and Ucancam for 2D/3D carving and lettering.
Industrial Applications
Target Production & Material Use CasesProfiling undermount sink cutouts, cooktop openings, drain grooves, and edge details on full 5x10 ft granite and quartz slabs.
Deep 3D relief carving of religious iconography, memorial inscriptions, and polished chamfering on thick granite gravestones.
High-speed mass production of geometric exterior stone wall panels, balustrades, and fluted column capitals.
Intricate multi-layered 3D carvings in white marble, red sandstone, and soapstone for temple pillars, ceilings, and sanctums.
Massive 3D wood relief carving on thick solid rosewood, teak, and composite architectural panels.
Key Operational Advantages
Engineering ROI & ReliabilityOversized 1500 x 3000 mm bed accepts raw 5x10 ft slabs directly, saving 30 to 45 minutes of slab preparation per job.
Continuous high-pressure water delivery prevents diamond binder glazing, extending tool lifespan up to 300% over dry cutting.
Massive 1800 kg frame and dual-motor gantry travel eliminate stepped chatter marks, slashing hand-polishing bench labor.
Stainless bellows protect linear bearings from aggressive quartz paste, preventing premature mechanical wear and downtime.
1530 Series Stone CNC Router, 6 Kw — Industrial Summary
Heavy-Duty 1500x3000 mm Wide-Bed Stone & Granite CNC Router (6.0 kW Spindle)
The MSUN 1530 Series Stone CNC Router is an extended-format industrial computer-numerical-control machining center designed specifically for processing full-sized commercial quarry stone slabs, architectural cladding panels, and massive granite blocks. Engineered with an expansive 1500 x 3000 mm (4.92 x 9.84 ft) active cutting envelope, this system eliminates the bottleneck of pre-cutting raw 5x10 ft stone slabs, allowing fabricators to load, profile, drill, and carve monumental workpieces in a single continuous machining setup.
Weighing in excess of 1,800 kg, the machine’s heavy-wall tubular steel bridge and box-beam bed are thermally normalized to eradicate internal welding stresses. Driving the cutting action is an industrial-rated 6.0 kW continuous-duty water-cooled electrospindle equipped with heavy-duty angular contact bearings and an ER32 collet system. An oversized stainless steel water table basin with recirculating pump plumbing directs continuous high-pressure coolant jets across the diamond tool cutting zone, keeping the diamond matrix clear of packed stone paste and maintaining cryogenic thermal stability.
Advanced Mechanical, Slurry Management & Motion Highlights:
- Extra-Large 1500 x 3000 mm Envelope: Perfectly suited for full-size standard 5x10 ft granite kitchen countertops, wall cladding slabs, and multi-piece temple friezes.
- 6.0 kW High-Torque Water-Cooled Electrospindle: Provides massive cutting torque from 6,000 to 24,000 RPM, allowing operators to run heavy 12.7 mm shank diamond core drills and contouring bits with zero RPM bogging.
- Dual-Drive Y-Axis High-Torque Motors: Synchronized dual-motor drive on the Y-axis gantry prevents crabbing and guarantees dead-square travel across the entire 3000 mm bed length.
- High-Speed 3000 mm/min Cutting Feed: Optimized motion planning allows smooth rapid travel up to 10,000 mm/min and heavy stone carving feeds up to 3000 mm/min.
- Heavy-Gauge 304 Stainless Steel Water Sink: Deep-welled perimeter sink flumes slurry rapidly into sedimentation recovery tanks, keeping workshop floors dry and sanitary.
- Double-Sealed Anti-Slurry Dust Covers: X, Y, and Z motion guides and drive screws are fully protected by flexible stainless accordion bellows and labyrinth seals that prevent abrasive stone mud intrusion.
Technical Specifications & Machine Architecture
| Specification | Parameter / Value |
|---|---|
| Machine Model | MSUN 1530 Series Stone CNC Router |
| Axis Count & Motion | 3-Axis Simultaneous Heavy Gantry |
| Brand & Manufacturer | MSUN / Daksh CAD CAM |
| Country of Origin | Made in India |
| Machine Total Weight | 1,800 kg (Annealed Heavy Box Steel) |
| XY-Axis Working Area | 1500 x 3000 mm (4.92 x 9.84 ft) |
| Z-Axis Working Clearance | 300 mm (Optional 400 mm High Gantry) |
| Bed Surface Type | Stainless Steel Water Bed with T-Slot Heavy Hold-Downs |
| Maximum Table Load | Up to 2,500 kg Heavy Slab Weight |
| Spindle Power Output | 6.0 kW (8.0 HP) Heavy Industrial Water-Cooled |
| Spindle Rotation Speed | 6,000 – 24,000 RPM Continuous Speed |
| Collet Specification | ER32 Collet (3.175 mm, 6 mm, 12.7 mm Shank Tools) |
| Maximum Cutting Speed | Up to 3,000 mm/min (Depends on Hardness & Depth) |
| Rapid Traverse Velocity | Up to 10,000 mm/min |
| X-Y Transmission Mechanism | High-Precision Helical Rack & Pinion System |
| Y-Axis Drive Configuration | Dual-Motor Synchronized Bilateral Drive |
| Z-Axis Transmission | German/Taiwan Ground Preloaded Ball Screw |
| Linear Guide Rails | 25 mm Square Linear Guide Rails with Dust Scrapers |
| Supported Materials | Natural Marble, Granite, Slate, Quartzite, Sandstone, Ceramic, Hardwood, Acrylic |
| Command Code Format | Standard G-Code, NC Files, HPGL |
| Operating Power Requirement | AC 380V ±10%, 50 Hz, 3-Phase, 9.5 kW Total Peak |
| Coolant Immersion System | Heavy Stainless Sump Tank with Sedimentation Baffles & Dual Jet Nozzles |
Customer Reviews & Operational Ratings
Genuine evaluations from manufacturing plants, fabrication units, and machine operators across India.
Based on 0 verified client reviews.
No Reviews Yet
Be the first industrial buyer to review this machine or spare part. Your operational feedback assists manufacturing engineers nationwide.
Complementary Industrial CNC Systems
CNC Router 1325 Wood Working Machine
Experience precision and power with the CNC Router 1325 Woodworking Machine. Featuring a heavy-duty steel frame and a high-speed 6KW air-cooled spindle, it delivers flawless carving, cutting, and milling for furniture, MDF, acrylic, and more.
CO2 LASER Cutting & Engraving Machine
High-precision CO2 laser cutting and engraving machine (60W–180W) engineered for clean cutting and fine engraving on acrylic, wood, leather, and glass. Built with durable Leadshine motion, CW water cooling, and versatile bed options up to 1400×1000 mm for signage, crafts, and prototyping.
1325V Double Spindle CNC Router
Industrial 4x8 ft dual-spindle 3-axis CNC router with high-torque 6.0 kW spindle capacity, heavy-duty T-slot clamping bed, and rapid 30,000 mm/min cutting speed. Built for synchronous dual-part production and wave board carving.