Reci CO2 Laser Tube
Genuine Reci 80W industrial CO2 laser tube featuring a 1250 mm length and 80 mm diameter. Engineered with inner catalyst gas-regeneration technology, TEM00 fundamental mode beam quality, metal end mirror housings, and up to 10,000 hours of operating life for high-precision cutting and raster engraving.
- check_circle Genuine Reci OEM Quality: 80W continuous rated power with peak burst capability up to 90W–100W for deep cutting penetration.
- check_circle Catalytic Gas-Regeneration Coating: Prevents gas depletion and guarantees stable beam output across an extended 10,000-hour lifespan.
- check_circle TEM00 Fundamental Mode Beam: Symmetrical circular spot profile delivers razor-sharp engraving definition and narrow cutting kerf.
- check_circle Kovar Glass-to-Metal Mirror Seals: Eliminates adhesive outgassing and maintains precise cavity collimation under thermal cycling.
- check_circle Heavy Borosilicate 3.3 Glass Body: Superior thermal shock resistance prevents cracking during high-current continuous duty.
- check_circle Standard Dimensions (1250mm x 80mm): Direct drop-in replacement for leading industrial laser machine brands without cabinet modification.
- check_circle Enhanced Dielectric Protection: Insulated high-voltage anode jacket and flexible pre-wired silicone cable prevent electrical arcing.
Target Applications & Use Cases
Industrial Applications FitVector cutting 2 mm to 12 mm cast and extruded acrylic sheets with flame-like edge transparency and zero taper.
High-speed perforation and pattern cutting of footwear leather, garments, and synthetic textiles without charred edges.
Clean slicing of 3 mm to 8 mm MDF, architectural model plywood, fretwork screens, and packaging boxes.
Raster photo engraving onto polished wood, marble plaques, coated glass, and anodized aluminum plates.
Replacing degraded, underpowered stock laser tubes in existing 1390 and 9060 machines to restore peak factory speed.
Engineering & Production Benefits
Key Operational AdvantagesInternal catalyst maintains rated wattage month after month, eliminating the frustrating cutting slow-downs common in budget tubes.
10,000-hour service life provides up to 3x the working hours of standard glass tubes, drastically lowering ongoing replacement overhead.
Consistent TEM00 beam geometry ensures nested parts across the entire table bed cut through reliably on the first pass.
Standardized 80 mm diameter and quick-connect cooling barbs make tube swap-out and realignment quick and painless.
Spare Part Overview & Technical Description
High-Performance Catalyst-Enhanced CO2 Laser Tube (80W / 1250mm)
The Reci 80W CO2 Laser Tube stands as the global industry benchmark for reliability, beam circularity, and operational lifespan in flatbed laser cutting and high-resolution engraving machinery. Measuring 1250 mm in overall length with an 80 mm outer diameter, this glass laser tube delivers a stable rated output of 80 Watts (with peak burst power reaching 90W to 100W), making it the optimal power class for clean vector slicing of acrylic, MDF, genuine leather, and dense architectural cardstock.
Unlike conventional glass discharge tubes that experience progressive power degradation due to gas dissociation, Reci integrates advanced catalytic chemical coating directly onto the inner discharge tube wall. During electrical excitation, this catalyst actively converts dissociated carbon monoxide (CO) and free oxygen (O2) back into active carbon dioxide (CO2), preserving the molecular chemical balance of the laser gas mixture and ensuring continuous power consistency throughout its 10,000-hour rated operating life.
Precision Optical Cavity & Structural Engineering Highlights:
- Kovar Glass-to-Metal Fusion: The total reflector and partial output coupler are seated in machined stainless steel and Kovar alloy housings fused directly to the borosilicate glass envelope, eliminating organic adhesive breakdown and optical misalignment caused by thermal expansion.
- Near-Gaussian TEM00 Transverse Mode: Boasts a fundamental single-mode beam purity exceeding 95%, yielding a microscopic focal waist (<0.2 mm) for crisp micro-character marking and glass-smooth, perpendicular acrylic cut edges without serrations.
- Reinforced Coaxial Water Jacket: Engineered for efficient fluid velocity and heat transfer, operating in tandem with industrial water chillers (CW-3000 / CW-5000) maintained at 18°C to 25°C to protect resonator optics from thermal distortion.
- Pre-Insulated High-Voltage Terminal: Equipped with an extended ceramic insulation sleeve and high-dielectric silicone cathode/anode boots, preventing high-voltage arc-over to the machine chassis during humid operating conditions.
- Universal Chassis Drop-In Compatibility: Standard 80 mm barrel diameter fits standard rubber-lined mounting cradles in 1390, 9060, 1610, and 1325 flatbed laser machines.
Full Specifications Sheet
| Specification | Parameter / Value |
|---|---|
| Minimum Order Quantity | 1 Piece |
| Brand | Reci |
| Model Name / Number | W2 / 80W (T2 Series Compatible) |
| Laser Type | Sealed CO2 Gas Discharge Laser |
| Packaging Type | Cushioned Wooden Export Case / Heavy Carton |
| Rated Output Power | 80 W |
| Peak Output Power | 90 W - 100 W |
| Emission Wavelength | 10.6 µm (Infrared Spectrum) |
| Beam Transverse Mode | TEM00 (Fundamental Gaussian Profile >95%) |
| Beam Diameter at Waist | Approx. 5.0 mm |
| Rated Operational Lifespan | Up to 10,000 Hours (With Recommended Chiller Cooling) |
| Total Tube Length | 1250 mm |
| Outer Tube Diameter | 80 mm |
| Envelope Material | Hard Borosilicate Glass 3.3 with Internal Catalyst |
| Trigger / Ignition Voltage | 24 kV - 26 kV |
| Recommended Operating Current | 24 mA - 26 mA (Max 28 mA) |
| Cooling Method | Closed-Loop Water Cooled (Industrial Chiller Required) |
| Recommended Coolant Temperature | 18°C - 25°C (Deionized or Distilled Water) |
| Minimum Coolant Flow Rate | 3 - 5 Litres / Minute |
| Target Applications | Marking, Leather Cutting, Acrylic Cutting, Vector Cutting, 3D Relief Engraving |
| Compatible Machine Types | CO2 Laser Cutting & Engraving Machines (1390, 9060, 1610, 1325 Platforms) |
Customer Reviews & Operational Ratings
Genuine evaluations from manufacturing plants, fabrication units, and machine operators across India.
Based on 0 verified client reviews.
No Reviews Yet
Be the first industrial buyer to review this machine or spare part. Your operational feedback assists manufacturing engineers nationwide.