Co2 Laser Power Supply
Industrial 60W CO2 laser high-voltage switching power supply with 12V DC auxiliary output, sub-millisecond response time, TTL logic control, and built-in open-circuit safety protection for glass laser tubes.
- check_circle Zero-Current Half-Bridge Switching: Delivers >90% power conversion efficiency and minimizes component heat generation.
- check_circle Open-Circuit Protection: Automatically disengages high-voltage circuits if the tube fractures or load disconnects.
- check_circle Sub-Millisecond Response (<1ms): Instant strike prevents start-point kerf widening and delivers crisp engraving.
- check_circle Dual Control Compatibility: Accepts both TTL digital on/off signals and analog 0-5V / 5V PWM power modulation.
- check_circle Auxiliary 12V DC Regulated Output: Powers auxiliary water chillers, interlocks, and air-assist relays directly.
- check_circle Manual Diagnostic Button: Simplifies troubleshooting by allowing manual beam testing right at the chassis.
- check_circle Heavy-Gauge Silicone High-Voltage Cable: Integrated pre-wired red ignition cable with insulated ceramic connector.
Target Applications & Use Cases
Industrial Applications FitStandard power generator for 40W, 50W, and 60W CO2 laser engraving machines.
Supplying stable, noise-free current for fine-detail rubber stamps, badges, and acrylic trophies.
Direct replacement for failed or flickering power supplies across all popular laser brands in India.
Bench-testing laser tubes, optical alignment setups, and high-voltage educational rigs.
Engineering & Production Benefits
Key Operational AdvantagesSmooth current delivery and zero-current switching prevent cathode sputtering and premature tube gas decay.
LED status indicators and manual test switch pinpoint whether a firing issue lies in software or optics.
Prevents explosive arc discharge if water tubing bends or the glass tube accidentally cracks.
Stable current regulation ensures uniform cutting depth from the start of the sheet to the end.
Spare Part Overview & Technical Description
High-Efficiency Switching Power Supply for CO2 Laser Glass Tubes
The WT01015012 CO2 Laser Power Supply is an industrial-grade high-voltage power generator engineered specifically for 40W, 50W, and 60W glass CO2 laser tubes used in cutting and engraving machines. Incorporating zero-current half-bridge soft-switching circuits, this unit achieves exceptionally high electrical efficiency and rapid sub-millisecond strike response, ensuring precise beam initiation for delicate engraving and crisp vector cutting.
Safety and tube preservation are engineered into every stage: the power supply features dedicated open-circuit protection circuitry that prevents transformer flashover or catastrophic damage if the laser tube breaks or disconnects. An auxiliary 12V DC output port supplies power directly to automation relays, cooling alarms, or auxiliary sensors, reducing external wiring complexity.
Engineering Highlights & Diagnostic Features:
- Fast Response Speed: Response time under 1 ms delivers razor-sharp start/stop control, eliminating tail burn marks on delicate acrylic and leather.
- Integrated Diagnostic Test Button: Manual "TEST" push-button allows technicians to test fire the laser tube instantly without software or PC connection.
- Flexible Control Logic: Supports both TTL high-level and low-level switching signals, plus 0-5V analog voltage or 5V PWM signal for linear power modulation.
- Robust Cooling Architecture: High-airflow internal fan ensures continuous thermal dissipation during long manufacturing runs.
Full Specifications Sheet
| Specification | Parameter / Value |
|---|---|
| Part Number | WT01015012 |
| Laser Type | CO2 Laser |
| Output Power | 60 W |
| Power | 60 W |
| Usage/Application | Industrial Automation, Laser Cutting & Engraving |
| Application | Engraving, Cutting |
| For Use With | Laser Machine |
| Output Voltage | 12 V DC (Auxiliary) / 24 kV (Laser Strike) |
| Input Voltage | AC 220V ±10% / 110V Optional (50/60 Hz) |
| Number of Outputs | 1 (High Voltage) + Auxiliary DC |
| Cooling | Air Cooled (Forced Internal Fan) |
| Response Time | ≤ 1 ms (Millisecond Quick Response) |
| Protection | Open Circuit Protection, Water Sensor Interlock |
Customer Reviews & Operational Ratings
Genuine evaluations from manufacturing plants, fabrication units, and machine operators across India.
Based on 0 verified client reviews.
No Reviews Yet
Be the first industrial buyer to review this machine or spare part. Your operational feedback assists manufacturing engineers nationwide.